IP2X防护等级试验探棒
产品概述: 符合GB4706、GB2099、GB4943、GB4208IPX2、GB3883图1、IEC61032图2试具B、IEC950图2A、IEC60884、IEC60335、GB/T16842试具B、UL507、EN60529图1、UL1278图8.4等标准要求。用于防止手指触及或防触电检验的防护检验。
基本简介: 1、根据GB4706.1-2005、GB2099.1-2008及相关IEC61032、UL等相应条款制作而成。 2、试验弯指是进行家用和类似用途电器防触电保护试验的必备器具。 技术参数: 1、弯指直径:12 mm 2、弯指长度:80mm(三节总长度) 3、挡板直径:50mm 4、挡板长度:100mm 5、参考标准:GB4706.1-2005第8.1.1条、IEC61032:1997 图2 IEC61032 Test Probe B 1.Application:
This is the “International” test finger required by most IEC, EN and CSA Standards, in addition to many UL Standards. Built in strict accordance to the newest requirements – with integrar palm simulator. This jointed test probe is strictly designed and manufactured according toIEC61032 , IEC60335, IEC60529 and GB/T4208,GB4706.1,GB/T16842 standards. This is the ONLY Finger Probe available with a integral jack in the handle for continuity testing -as mandated by the IEC CB Scheme. Finger is made of chrome plated steel/stainless steel. All parts precision machined. Test Finger Probe is intended to verify protection of persons against access to hazardous parts for an IP1 Code. Also used to verify protection from access with the back of the hand for an IP suffix A code. 2.Technical paremeter: Knurled finger diameter 12mm Knurler finger length 80mm Baffle plate diameter 50mm Baffle plate length 100mm Reference IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1
粤公网安备 44030602001687号