产品资料

CX-Q02 球压试验仪

如果您对该产品感兴趣的话,可以
产品名称: CX-Q02 球压试验仪
产品型号: CX-Q02
产品展商: LCX
产品文档: 无相关文档

简单介绍

球压试验仪 基本简介: 1、根据GB4706.1-2005、GB2099.1-2008、GB/T5159.21-2006、 IEC60695-10-2:2003等标准制作而成。


CX-Q02 球压试验仪  的详细介绍

球压试验仪
基本简介:
1、根据GB4706.1-2005、GB2099.1-2008、GB/T5159.21-2006、 IEC60695-10-2:2003等标准制作而成。
2、球压试验是将规定钢球 (R2.5mm) 和总试验力 20N±0.2N 的球压试验仪,压在呈水准状态且置于加热箱内的试品表面上,在试品规定的温度下经60min+2min/0min后,将试品快速(<10s)浸入20℃±5℃水中冷却6min
±2min ,从水中取出 3min 内测量试品表面压痕直径,视压痕直径是否超过 2mm 来评定试品在该规定的温度下
的耐热变形能力。

技术参数:

1、球直径:5mm (R2.5mm)

2、总试验压力:20N±0.2N

3、样品支座:直径50mm、长度100mm 实心不锈钢圆柱体

4、制作材料:全部采用不锈钢材料

5、参照标准:GB4706.1-2005、GB2099.1-2008、GB/T5159.21-2006、 IEC60695-10-2:2003

 IEC60695 ball pressure testing equipment  

 1.Application:

  •  Ball Pressure Tester is used for testing parts of non-metallic materials for resistance to heat. It is applicable to electro technical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics.
  • In this test, a conditioned specimen is placed on a preheated support and subjected to a force of 20N applied through a 5mm steel ball. The test stand, specimen and loading device are then kept in an oven at an elevated temperature for an hour. After the hour, the loading device is removed from the sample, the sample is cooled and any indentation is measured. It is important to assure that the test stand has reached a stable elevated temperature as required by the test.
  • Test Goal: To simulate the thermal stress with pressure.

2.Design Standards:

  • IEC60695-10-2(2003),IEC60884-1,IEC60320-1,IEC60335-1,IEC60598-1,
  • IEC60950-1,GB2099.1,GB5169.21,GB4706.1.and other similar standards.

3.Basic introduction:

  • Ball Pressure Apparatus is the requirement ball (R2.5mm) and total test force 20N ± 0.2N ball pressure testing device,pressure level of the state and was placed in the heating chamber on the surface of the test.
  • In the test temperature specified by the after 60min +2 min/0min,the test quickly (<10s) immersed in 20 °C ± 5 °C water cooling 6min ± 2min,3min removed from the water surface within the indentation diameter measurement test, as the indentation is more than 2mm in diameter to evaluate the test specified in the heat deformation temperature.

4.Technical parameters

  

Ball diameter 5mm ± 0.05mm
Ball pressure 20N(includes loading device and ball)
Test stand 100mm high X50mm diameter,hole diameter:2mm
Material 304 stainless steel,ball:hardened steel
Standard

IEC60695-10-2(2003),IEC60884-1,IEC60320-1,

IEC60335-1,IEC60598-1,IEC60950-1,

 

Product Details: 

 

.jpg  

 

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

粤公网安备 44030602001687号